Product Categories
- Roll Forming Machine
- Cable Tray Duplex Roll Forming Machine
- Cold Roll Forming Machine
- Guardrail Roll Forming Machine
- Purlin Roll Forming Machine
- Roll Forming Machines For Automobile
- Roll Forming Machines For Door Framing
- Shelving And Racking Roll Forming Machine
- Step Tile Roll Forming Machines
- Stud and Track Roll Forming Machine
- Metal Roofing Machine
- Cutting & Slitting Lines
- Roll Forming Accessories
- Profile Collections
Purlin Roll Forming Machine
Duplex Purlin Roll Forming Line
■ Raw material parameters：
|
Quality |
Thickness |
Coil width |
Coil ID |
Coil OD |
Yield strength |
Max Weight |
|
Q235 GI |
1.5-3mm |
Per profile |
Ø508mm |
Ø1200mm |
≤300Mpa |
5T |
■ Material tolerance：
|
Thickness |
Width |
Straightness |
ID |
Standard |
|
±0.07mm |
+0mm/-0.2mm |
0.2mm/m |
±15mm |
GB |
- Explanation
1、 Product Parameters：
■ Profile drawing to be confirmed before order
Remark: H=100~275mm
B: 50-100mm
C: 10-20mm
T: 1.5-3.0mm
■ Raw material parameters：
|
Quality |
Thickness |
Coil width |
Coil ID |
Coil OD |
Yield strength |
Max Weight |
|
Q235 GI |
1.5-3mm |
Per profile |
Ø508mm |
Ø1200mm |
≤300Mpa |
5T |
■ Material tolerance：
|
Thickness |
Width |
Straightness |
ID |
Standard |
|
±0.07mm |
+0mm/-0.2mm |
0.2mm/m |
±15mm |
GB |
The plate surface can not have obvious concave convex (concave convex range is less than or equal to the thickness of the steel plate 10%)
there shall be no non conventional exfoliation, so as not to affect the roll forming quality.
If the galvanized sheet, galvanized surface should be galvanized in conformity with the relevant galvanized plate inspection standard, there shall be no non conventional zinc layer off, so as not to affect the roll forming quality.
2、 Working conditions：
■ Temperature：-10℃~35℃
■ Voltage：380V±10%，50HZ，3P
■ Pneumatic requirement：0.6~1.2Mpa
■ Max air flow：300L/min
■ Max power：≈45KW
■ Painting color：
|
Main RAL5015 |
Mobile part Cover RAL3020 |
Mobile part RAL1016 |
Protective fence RAL9017 |
|
RAL5015 |
RAL3020 |
RAL1016 |
RAL9017 |
■ Line direction：Left to right direction operator facing
■ Line forming Capacity ：15m/min(Punching and cutting time not inclusive)
■ Land occupation：L≈20m，W≈3m，H≈2m
■ Shipping requirements
|
Type |
40GP |
40OH |
40OT |
20GP |
20OH |
20OT |
|
Quantity |
1 |
|
|
1 |
|
|
3、 Line flow
|
Sequence |
1 |
2 |
3 |
4 |
5 |
|
Name |
Decoil |
Flatten |
Punch&cut |
Roll-form |
output |
4、 Consignment list
|
No. |
Name |
Quantity |
Function |
Remark |
|
1 |
Decoiler |
1 |
|
|
|
2 |
Leveler |
1 |
|
|
|
3 |
Punching and cutting device |
1 |
|
|
|
4 |
Rollformer |
1 |
|
|
|
5 |
Roll |
1 |
|
|
|
6 |
Output table |
1 |
|
|
|
7 |
Hydraulics |
1 |
|
|
|
8 |
Electrical system |
1 |
|
|
|
9 |
Security system |
1 |
|
|
|
10 |
Remote assitance router |
1 |
|
Optional |
|
11 |
Spare parts |
1 |
|
|
|
12 |
Guidebook and technical instruction |
1 |
|
|
